Advanced search options

your global
premium supplier
for laboratory equipment,
accessories and consumables
of word leading manufacturers.
Benchtop centrifuge with cooling Consul 21R, Orto Alresa

The picture may be different from the article and can include supply, which is not in the standard scope.

Benchtop centrifuge with cooling Consul 21R, Orto Alresa

Art #:
Consul 21R
Validity: 31.12.2021
Last Update: 14.06.2021
Benchtop centrifuge with cooling Consul 21R, Orto Alresa

High capacity on a bench top centrifuge which offer to their users several advantages, up to now only available on devices dedicated to research.The TFT touch screen simplifies the parameter selection; main values appear only in one screen as time, RPM, RCF, acceleration and braking.

The operator menu allows other values adjustment as open lid once the rotor stops, locking RPM/RCF along the run, selection of time from 0 or at set RPM/RCF

Along centrifugation it showed on screen a graphic indicating its status as well as the stage of centrifugation, time to end of process.

The devices included on series Consul 21R are highly functionalsthey can spi up to 4 x 400 ml, 48 tubes of 15 ml, 12 conical tubes of 50 ml and 28 of 15 ml conical, rotor for microplates, microtubes, as well as a wide set of adapters for each one.

Innovating about centrifugation.


User friendliness

  • TFT touch screen easy to read and values selection (RPM on steps of 100, RCF on steps of 10xg), time, temperature (1°C steps), acceleration/deceleration (1 second steps).
  • The screen which indicates the status can be seen from more than 3 m.
  • Rotor and adapters list on memory.
  • Real values on screen of RCF based on accessories configuration.
  • Timer count up/down, from 0 or at “set RPM/RCF” for test reproducibility.
  • Short spin key with speed adjustable.
  • Progressive acceleration and braking selectable by operator up to 175 ramps.
  • Program data protection through password selectable.
  • Automatic rotor recognition.
  • Automatic lid latch lock.
  • Microprocessor controlled.
  • Option: free or locked adjustment of RPM/RCF along the run.


  • Induction motor maintenance free
  • High capacity: Max. Volume 4 x 400 ml.
  • High speed, up to 20.804 xg./14.300 RPM.
  • Quiet: noise level < 60 dB.
  • 15 memories + pre-cooling program.


  • Lid locking and holding.
  • Imbalance switch off.
  • Manual overriding.
  • Chamber of centrifugation in stainless steel.
  • Viewing and calibration prot in the lid.
  • Several messages keep the operator informed about the device situation.
  • Guard ring between the chamber of centrifugation and the housing.
  • Lid dropping protection.


  • Precooling program with rotor spinning and temperature selectable by operator.
  • 4°C at least at max speed with any rotor.
  • Range of temperature -20°C (-4°F) to 40°C (104°F)
  • Scale Celsius or Fahrenheit.
  • Temperature sensor inside the chamber.
  • Gas R 404A HFC.

Standards and EC Directives

EU Directives: 98/79/EC, 2006/95/EC, 2004/108/EC, 2011/65/EU, 2012/19/EU.
Regulation: 1005/2009 & 842/2006.
Standards: EN 61010-1, EN 61010-2-020, EN 61326-1.

Technical data
Refrigeration available: Yes