The picture may be different from the article and can include supply, which is not in the standard scope.

ASTM centrifuge Digtor 21 C-8, Orto Alresa

Order-No
Digtor21C8

Art #:

Digtor 21C-8

Category:

Other centrifuges
Show all Other centrifuges from Wenk LabTec

Validity: 31.12.2021
Last Update: 14.06.2021

Price on request for 1 Unit

Description

ASTM centrifuge Digtor 21 C-8, Orto Alresa

The centrifuge Digtor 21 C-8 is designed for the determination of water and sediments in oils, and characteristics of precipitation and demulsibility and the characterization of waste oils, on labs with a high number of samples, due to it can spin up to 8 tubes of 8” at once.

It is provided with accessories for spin cylinder-conical tubes of 6 and 8 inches, pear-shaped tubes of 6 inches and tubes for trace elements and 12,5ml.

Its proper for processing samples according following standards : ASTM D 91, D 96, D 893, D 1796, D 2273, D 2709, D 2711, D 4007, D 5546, API 2542, API 2548, BS 4385, ISO 3734, ISO 9030, IP75, IP 359, NF M07-020.

User friendliness

TFT touch screen easy to read and values selection (RPM on steps of 100, RCF on steps of 10xg), time, temperature (1°C steps), acceleration/deceleration (1 second steps).
The screen which indicates the status can be seen from more than 3 m.
Rotor and adapters list on memory.
Real values on screen of RCF (xg) based on accessories configuration.
Timer count up/down, from 0 or at “set RPM/RCF” for test reproducibility.
Short spin key with speed adjustable.
Progressive acceleration and braking selectable by operator up to 175 ramps.
Automatic rotor recognition.
Automatic lid latch lock.
Microprocessor controlled.
Option: free or locked adjustment of RPM/RCF along the run.
Program data protection through password selectable.
Tubes on upright on rest.

Features

Induction motor maintenance free.
Max. speed 3.000 RPM/2.425 RCF (on steps 100 RPM/10 xg)
Quiet: noise level < 60 dB.
15 memories + pre-heating program: it allows warm the chamber to test temperature before spin the sample.
Device and accessories specially designed for petrol applications.

Safety

Optional Gas Release System: all devices include pre-installation.
Isolated avoiding heat lost.
Lid locking and holding and lid dropping protection.
Overheating protection.
Imbalance switch off.
Chamber of centrifugation in stainless steel.
Viewing and calibration port in the lid.
Several messages keep the operator informed about the device situation.
Guard ring between the chamber of centrifugation and the housing.

Heating

Preheating program with rotor spinning and temperature selectable by operator.
Temperature from room + 5°C to 80°C (176°F).
Scale Celsius or Fahrenheit.
Temperature sensor inside the chamber.