The picture may be different from the article and can include supply, which is not in the standard scope.

Show all alternative articles (21)

Price on request for 1 piece

Price contains tank 10l, connectors (water supply, sewage, tank) and a set of filters

General information

Fed by: tap water
Efficiency: 4 dm3/h
Water delivery rate: 1-2 I/min
Conductivity < 0,06 µS/cm
Standard: second and third class (ISO 3696:1999)
Intended for: instrumental analyses: UV-VIS, AAS, ICP/MS, IC, preparation of buffer solutions, reagents and mediums, general cleaning and washing


Technical specification

Operates under the feed water pressure.
Water purification process stages:
sediment filtration,
active carbon filtration,
water softening bed,
reverse osmosis,
double demineralization on the ion-exchange resin
System efficiency: ca. 4 dm3/h (daily: ca. 100 dm3).
Demineralized water conductivity < 0,06 µS/cm.
Automated operation.
Water collection point - second quality class (PN-EN ISO 3696:1999), with a demi water nozzle (min. 2 m reach)
Additional ultrapure water collection point - first quality class (PN-EN ISO 3696:1999).
Mobile, adjustable inox arm holding water collection points – available adjustment ranges: up/down, front/back, left/right.
10 dm3 storage tank.
Automatic shutdown when a tank is full.
Service operations may be done by the user (easy disposable cartridges changing).
Maximum working pressure: 1 MPa.
Should be fed by cold water: 5-40°C
Power supply: 230V/50Hz.
Can be installed by the user.
Acid-proof stainless steel (inox) housing.


Functions monitoring system performance:

The device is equipped with a microprocessor control and measurement, that includes:
LCD screen 2x16 characters,
conductometer measuring purified water pressure (in µS/cm or MOhm)
displaying values compensated thermally,
clock displaying date and time,
alarm informing about the necessity to replace the mechanical and carbon filters,
alarm informing about the necessity to replace the ion exchange resins,
service dates display,
RS 232 connector for the communication with a PC,
personalization of the service dates and alarm levels directly from the device's keyboard.
Manometer displaying date and time


Dimensions (width x length x height): 200x360x420 mm



Feed water parameters:

Conductivity < 1200 µS/cm
Pressure > 0,35 bar
Temperature : 5-40 0C
Hardness < 250 mg CaCO3/dm3
Fe < 0,2 mg/dm3


Installation point connections:

cold tap water connection ½” lub ¾”
230V power supply socket
waste connection